News

Picture for category Vishay / BC Components PTCSL03 PTC Thermistors

Vishay / BC Components PTCSL03 PTC Thermistors

Vishay / BC Components PTCSL03 PTC Thermistors are mini radial-leaded devices for over-temperature protection. PTCSL03 thermistors offer well-defined protection temperature levels, fast response time, and accurate resistance. These Vishay devices offer a wide range of protection temperatures from +80ºC to +150ºC. PTCSL03 provides over-temperature protection and control in a variety of applications, including industrial electronics, power supplies, motor drives, and more.

Picture for category Abracon ANFCA 13.56MHz Flexible Ferrite Antennas

Abracon ANFCA 13.56MHz Flexible Ferrite Antennas

Abracon ANFCA 13.56MHz Flexible Ferrite Antennas are very thin flexible NFC antennas built-up from four bonded layers [adhesive tape, a flexible printed circuit (FPC), PET tape, and a ferrite sheet]. The bonded layers provide a total thickness of 120µm to 240µm providing flexibility. NFC antennas are able to operate as a one-way or bi-directional communication device. The ANFCA antennas offer three modes of operation (NFC Reader/Writer Mode, NFC Peer-to-Peer Mode, and NFC Card Emulat - devamı...

Picture for category ROHM Semiconductor 64kbit 8k x 8-bit FeRAM

ROHM Semiconductor 64kbit 8k x 8-bit FeRAM

ROHM Semiconductor 64kbit 8k x 8-bit FeRAM memories are nonvolatile Ferroelectric Random Access Memory (FeRAM) developed in the ferroelectric process and silicon-gate CMOS technology. The MR44V064B FeRAM is accessed using two-wire serial interface (I2C Bus) and MR45V064B FeRAM using serial peripheral interface. These FeRAM devices eliminate battery backup required to hold data as cells are nonvolatile. The FeRAM memories offer no mechanisms of erasing and programming memory cells and - devamı...

Picture for category TDK / EPCOS B4364 Series  Aluminum Electrolytic Snap-In Capacitors

TDK / EPCOS B4364 Series Aluminum Electrolytic Snap-In Capacitors

TDK / EPCOS B4364 Series Aluminum Electrolytic Snap-In Capacitors are ultra compact, extremely high CV, products that feature high reliability, long useful life, and high ripple current capability. Different case sizes are available for each capacitance value. All insulation versions of B4364 Series capacitors pass the needle flame test according to IEC 60695-11-5 for all flame exposure times up to 120s. The B4364 series snap-in capacitors are RoHS-compatible.

Picture for category Panasonic Hybrid Aluminium Electrolytic Capacitors

Panasonic Hybrid Aluminium Electrolytic Capacitors

Panasonic Anti-Vibration Conductive Polymer Hybrid Aluminium Electrolytic Capacitors combine the benefits of both electrolytic and polymer capacitor technologies to produce a capacitor with low ESR, low leakage current, high ripple current, and smaller case sizes. The components are capacitors with the electrolyte fused with conductive polymer and electrolyte liquid. The components are offered in a voltage range of 25VDC to 80VDC, 10µF to 470µF rated capacitance, an ESR of 20mΩ to 12 - devamı...

Picture for category Silicon Microstructures, Inc. (SMI) SM933x Differential Pressure Sensors

Silicon Microstructures, Inc. (SMI) SM933x Differential Pressure Sensors

Silicon Microstructures SM933x Differential Pressure Sensors are high precision sensors for ultra low-pressure measurements. The SM933x sensors offer state-of-the-art Micro-ElectroMechanical Systems (MEMS) pressure transducer technology and CMOS mixed signal processing technology. These differential pressure sensors combine pressure sensor with signal-conditioning Application-Specific Integrated Circuit (ASIC) in a single package.

Picture for category Texas Instruments LM36011 Inductorless LED Flash Drivers

Texas Instruments LM36011 Inductorless LED Flash Drivers

Texas Instruments LM36011 Inductorless LED Flash Drivers offer a high level of adjustability and a small-solution size of 4mm2. The device produces up to 1.5A of LED flash current or up to 376mA of torch current. The accurately programmable current source retains this current without the need of a pre-regulated voltage, saving both solution size and cost. An I2C-compatible interface controls features including hardware flash (STROBE), flash time-out, UVLO, thermal scale-back, LED fau - devamı...

Picture for category EPCOS / TDK HVC High-Voltage Contactors

EPCOS / TDK HVC High-Voltage Contactors

EPCOS High-Voltage Contactors (HVC) are designed to meet the requirements of high-voltage DC switching applications. The contactors are hermetically sealed for excellent reliability in harsh environments and have high-speed arc extinguishing. The HVC series feature maximum operating voltage up to 900V DC and offer high continuous operating current up to 500A. The series can be used in a wide range of applications where fast and reliable switching operations are required.

Picture for category Amphenol Commercial MRD Rugged Circular Locking Connectors

Amphenol Commercial MRD Rugged Circular Locking Connectors

Amphenol Commercial MRD Rugged Circular Locking Connectors are 2-, 3-, and 4-position IP67 connectors designed for harsh industrial connectors. Amphenol Commercial MRD Rugged Circular Locking Connectors feature housing options including all-plastic constructions and metal-locking bodies for increased durability. Locking options include 1/3-turn bayonet as well as quick-release metal latches. Panel mount and cable termination options are available with or without finger-proof protecti - devamı...

Picture for category Bel Fuse SMT & Radial Lead PTC Resettable Fuses

Bel Fuse SMT & Radial Lead PTC Resettable Fuses

Bel Fuse SMT and Radial Lead PTC (positive temperature coefficient) Resettable Fuses offer circuit protection, with an added resettable feature, in low profile SMT packages or traditional radial lead packages. Similar to Bel's extensive line of traditional fuse products, these resettable fuses protect against harmful overcurrent and short circuit conditions.